Description
hardware flow control. It is an ideal choice in the field of industrial automation.
Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technology
introduction
In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the
industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot”s front-end tools. This article
mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology.
DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with
Siemens PLC based on the DeviceNet network.
1Configure DSQC652
There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to
them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which
mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16
digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board,
enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2.
ABB standard I/0 board is hung on the DeviceNet
network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module.
The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down
menu to select the “Use value from template” row, select
“DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.
Figure 1 Configuring DSQC652
2Configure signals and parameters
After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with
the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the
signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting
input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters.
After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time
is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are
completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.
Figure 2 Configure DSQC652 parameters
Figure 3 Signal parameter settings
During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be
established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number
of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.
The entire robot teaching pendant setting process is shown in Figure 4.
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
1746-BAS Allen-Bradley Single slot module
1606-XL240DRT Allen-Bradley 1606-XL switching power supply
1734-AENT Allen-Bradley point input/output Ethernet input/outgoing communication adapter
1494V-FS400 Allen-Bradley Trailer fuse box
1492-W4 Allen-Bradley Junction junction box
1485A-C2 Allen-Bradley Carbon film resistor
1394-SJT10-C-RL Allen-Bradley GMC standard system module
1394C-SJT05-D Allen-Bradley Modular, multi-axis motion control drive system module
1391-DES45 Allen-Bradley digital AC servo driver
1336-PB-SP2B Allen-Bradley Precharged electric plate
1336-MOD-KB010 Allen-Bradley AC driven dynamic brake assembly manufactured
1336-MOD-L2 Allen-Bradley 5VDCTL Logical interface board
1336-L6E/L9E Allen-Bradley Control interface driver board
1336F-BRF15-AA-EN Allen-Bradley AC driver with adjustable frequency
1336-BDB-SP37C Allen-Bradley discontinued grid drive board
1336-B025-AA-EN-GM1 Allen-Bradley driver
1203-GK5 Allen-Bradley Input module
1326AB-B720E-21 Allen-Bradley servo motor
531X307LTBAHG1 GE Local area network (LAN) terminal board
531X304IBDARG1 GE PC basic driver card
1203-CN1 Allen-Bradley control net Communication module
531X303MCPBBG1 GE Power circuit board
170PNT11020 Schneider Modbus PLus communication adapter manufactured
150-B97NBDB Allen-Bradley Solid state controller
22B-D024N104 Allen-Bradley PowerHlex 40 Series AC drive
6GK7542-5FX00-0XE0 Siemens Communication processor
5X00121G01 Emerson Switching quantity output module
2DS100.60-1 B&R Absolute encoder
1TGE120011R1001 ABB motor and feed control unit of MNS
0-60063-1 RELIANCE PMI regulating board
0-51378-25 RELIANCE Gate coupling plate
0-57C405-C RELIANCE analog Ⅳ/O drive module
UTNH23A TOSHIBA Fiber shared hub unit
TSXP573623 Schneider dual format PL7 processor
TC-PRR021 Honeywell Redundant module
TK-PRS021 HONEYWELL Control processor module
TC-FPCXX2 Honeywell Power supply
TC-4000-P-PB-ES ATLAS COPCO Power supply driver
T8403 ICS TRIPLEX Trusted TMR 24Vdc digital input module
T8311 ICS Triplex Trusted TMR extender interface
SCXI-1600 NI Data acquisition module
T8151B ICS TRIPLEX Trusted communication interface
SCXI-1000 NI 4 slots, AC chassis
SAN4-40M DDK Servo drive
SAFT183VMC ABB Control the motherboard
PQMII-T20 GE Power quality meter
PFCL201C 10KN ABB tension sensor
PDD200A101 3BHE019633R0101/3BHE020P201 ABB Control board circuit board
P0917XV FOXBORO Compression end assembly
P0916BX FOXBORO Terminal component
MVME715P MOTOROLA transition module
MVME712A/AM MOTOROLA VME control card
MVME335 MOTOROLA Interface board
MVME333-2 MOTOROLA controller communication module
MVME147SRF MOTOROLA Double height VME module
MVI56-MDA4 PROSOFT Platform main module
MOX12-P3509 ABSOPULSE POWER SUPPLY
MDS60A0150-503-4-00 SEW drive
MMS6120 EPRO double-channel bearing vibration measurement module
LZS-1500-3 TDK-Lambda Output industrial power supply
LDSYN-101 ABB Communication controller unit
Reviews
There are no reviews yet.