SPSED01 Interface Controller

Product parameters

Model: SPSED01

Brand: ABB

Size: 10cm x 10cm x 30cm

Weight: 1.2KG

Color: White Black

Working voltage: 5V

Working temperature: -10 ℃ to 50 ℃

Communication interface: RS232, RS485, CAN

Product specifications

Support for MODBUS protocol

Support hardware flow control

Using high-speed CMOS devices

Support for data caching

application area

SPSED01 is mainly used in the field of industrial automation, such as DCS PLCs, industrial controllers, robots, etc.

SPSED01 is mainly used in steel manufacturing, thermal power generation, hydroelectric power generation, glass manufacturing, paper mills, cement factories, petrochemicals

Chemical fiber, pharmaceutical manufacturing, rubber, plastics, ferrous metal food, machine tools, specialized equipment, transportation vehicles, mechanical equipment

Electronic communication equipment, instruments and beverages, tobacco processing, clothing, textiles, leather, wood processing, furniture, printing, etc

Model: SPSED01 Brand: ABB Archive Function: Communication Function Product Certification: Qualified

Working voltage: 24V Internal variable: No pattern Type: Vector diagram Applicable range: Industrial type

Number of screens: 4 Imported or not: Yes Customized for processing: No

Alarm function: Product name: Module Input voltage: 24V Rated current: 5A

Special service: including postage. Remarks: one-year warranty. Operation method: remote control

Applicable motor: servo motor system memory: 8MB Display color: 99.9 color gamut

Power voltage: 220V Input method: Current Input Material code: 65218

Communication interface: HDMI interface Working temperature: 60 Material number 26854 Other functions Analog communication

Output frequency: 50HZ Rated voltage: 24V Alarm type: Light alarm

Disconnect capacity: 0.01 Vector graph support: Minimum number of packages supported: 1

Display type: IPS USB interface quantity: 2 interfaces Memory card slot: 2

Panel protection level: 3 Memory expansion capacity: 128MB User script support: supported

Speed response frequency: 1MS Working environment temperature: -40 to 100 Insulation withstand voltage test: Passed

Third party communication products: ABB controllers available for sale in: nationwide

Product Instructions

Please install SPSED01 correctly on the device and connect the communication interface cable properly.

Please refer to the user manual for operating SPSED01 to ensure proper use.

Product Introduction

SPSED01 is a high-performance industrial automation communication module that uses high-speed CMOS devices, supports MODBUS protocol, and supports
hardware flow control. It is an ideal choice in the field of industrial automation.

3.2 Upgrading of regulators and control systems

For the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card.
Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller,
CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.

For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five
UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier
bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was
changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control
interface board (CIN) was changed to the rectifier bridge control board (CCI).

For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special
power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part,
the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.

For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the
CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. .
For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the
cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.

3.3Unitrol6800 functional logic configuration points

The Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT
slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic
commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same
time, it can
avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to
alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid
the problem of tripping of the excitation system
due to signal interference.

4 Problems discovered during the transformation and their solutions

After upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch
cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator
cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused
by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the
temperature to 30°C.

During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to
malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.

5 Conclusion

Through the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also
eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance
and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more
convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of
information transmission is ensured. Avoid communication failures and damage to pulse lines.

UFC911B106 3BHE037864R0106 System board card
UFC911B108 ABB Control module card key
UFC911B110 ABB Input control panel
UFC921A101 3BHE024855R0101 Interface module
UFD203A101 3BHE019361R0101 ABB Industrial Ethernet
UNITROL 1010 PLC control system
UNITROL 1020 ABB Input output module
UNITROL1000 Z.V3 3BHE014557R0003 ABB Numerical control module
UNS0007A-P V1 ABB DCS controller module
UNS0119A-P,V101 ABB Digital input submodule
UNS0874A ABB  Control I/O module
UNS0887A-P 3BHE008128R0001 Analog input module
UNS2880b-P,V2 3BHE014967R0002 Analog output circuit board
UNS2881B-P V1 ABB Robot network communication card
UNS2882A 3BHE003855R0001 Connecting terminal unit
UNS2980c-ZV4 ABB Robot axis calculation board
UNS4881b,V4 3BHE009949R0004 ABB Analog output circuit board
UNS3670A-Z V2 HIEE205011R0002 Servo servo module
C3K122-24P ENTERASYS Controller module
C3K122-24 ENTERASYS Control of signal
C3G124-48 ENTERASYS  Processor module
C3G124-24 ENTERASYS  Processor module
ENTERASYS C3G124-24P Network interface module
08G20G4-48P  800-Series Layer 2 switch
08G20G4-48  800-Series Layer 2 switch
08G20G4-24P  800-Series Layer 2 switch
08G20G2-08P  800-Series Layer 2 switch
ENTERASYS 08H20G4-48 800-Series Layer 2 switch
08G20G2-08  800-Series Layer 2 switch ENTERASYS
08H20G4-48P 800-Series 10/100 Switches ENTERASYS
08H20G4-24P ENTERASYS switch
08H20G4-24 ENTERASYS 24 port 10/100 800-Series Layer 2 switch
B5K125-48 and B5K125-48P2 ENTERASYS gateway
B5K125-24 and B5K125-24P2 ENTERASYS  Switch
B5G124-24 and B5G124-24P2 Ethernet Switch
ENTERASYS B5G124-24 Ethernet Switch
I3H252-8TX-2FX ENTERASYS High-end Secure Networks
I3H252-8FXM ENTERASYS
I3H252-6TX-MEM ENTERASYS Ethernet
ENTERASYS I3H252-4FX-MEM Ethernet L2 Switch
switch I3H252-4FXM ENTERASYS
I3H252-12TX ENTERASYS Ethernet switch
Switch A2H254-16 ENTERASYS
A2H124-24FX Switch ENTERASYS
ENTERASYS A2H124-48P Switch Ports
A2H124-48 Switch Ports ENTERASYS