PFEA112-65 Interface Controller

Product parameters

Model: PFEA112-65

Brand: ABB

Size: 10cm x 10cm x 30cm

Weight: 1.2KG

Color: White Black

Working voltage: 5V

Working temperature: -10 ℃ to 50 ℃

Communication interface: RS232, RS485, CAN

Product specifications

Support for MODBUS protocol

Support hardware flow control

Using high-speed CMOS devices

Support for data caching

application area

PFEA112-65 is mainly used in the field of industrial automation, such as DCS PLCs, industrial controllers, robots, etc.

PFEA112-65 is mainly used in steel manufacturing, thermal power generation, hydroelectric power generation, glass manufacturing, paper mills, cement factories, petrochemicals

Chemical fiber, pharmaceutical manufacturing, rubber, plastics, ferrous metal food, machine tools, specialized equipment, transportation vehicles, mechanical equipment

Electronic communication equipment, instruments and beverages, tobacco processing, clothing, textiles, leather, wood processing, furniture, printing, etc

Model: PFEA112-65 Brand: ABB Archive Function: Communication Function Product Certification: Qualified

Working voltage: 24V Internal variable: No pattern Type: Vector diagram Applicable range: Industrial type

Number of screens: 4 Imported or not: Yes Customized for processing: No

Alarm function: Product name: Module Input voltage: 24V Rated current: 5A

Special service: including postage. Remarks: one-year warranty. Operation method: remote control

Applicable motor: servo motor system memory: 8MB Display color: 99.9 color gamut

Power voltage: 220V Input method: Current Input Material code: 65218

Communication interface: HDMI interface Working temperature: 60 Material number 26854 Other functions Analog communication

Output frequency: 50HZ Rated voltage: 24V Alarm type: Light alarm

Disconnect capacity: 0.01 Vector graph support: Minimum number of packages supported: 1

Display type: IPS USB interface quantity: 2 interfaces Memory card slot: 2

Panel protection level: 3 Memory expansion capacity: 128MB User script support: supported

Speed response frequency: 1MS Working environment temperature: -40 to 100 Insulation withstand voltage test: Passed

Third party communication products: ABB controllers available for sale in: nationwide

Product Instructions

Please install PFEA112-65 correctly on the device and connect the communication interface cable properly.

Please refer to the user manual for operating PFEA112-65 to ensure proper use.

Product Introduction

PFEA112-65 is a high-performance industrial automation communication module that uses high-speed CMOS devices, supports MODBUS protocol, and supports
hardware flow control. It is an ideal choice in the field of industrial automation.

user experience

Secondly, if power system engineers are to consider the convenience and speed of using the product in the future, operability needs to be improved while ensuring stability.
This requires a simple self-service system and an operation interface with good visual effects that can meet the needs of users. Some operating habits and other aspects

* cut costs

Furthermore, since there are many nodes in the power system, the same product needs to be deployed on many nodes. Then when the quantity of required products increases,
cost issues will inevitably be involved. How to solve the research and development, construction and installation of products and better reduce operating expenses is also a major issue that ABB needs to consider.

Implementation of communication between Omron vision system and ABB industrial robot

introduction

In modern production processes, vision systems are often used to measure and identify products, and then the results are transmitted to industrial robots for work
through communications . In this process, communication settings are very important. This article analyzes the communication implementation process between the Omron
FH-L550 vision system and ABB industrial robots. The main task is to enable the vision system to provide data detection results for ABB industrial robots, and the industrial robots
perform related operations based on the data results. This article mainly discusses the entire process of visual system communication transmission implementation.

1Ethernet-based communication settings in vision software

The main communication methods of Omron FH-L550 vision system controller are as follows [2], namely: parallel communication, PLCLINK communication, Ethernet
communication, EtherCAT communication, and protocol-free communication. These five communication methods have their own characteristics in the communication process.
In modern equipment, Ethernet communication
(Ethernet communication) is the most common, so this article uses the Ethernet communication method as an example to analyze and explain.

First, select the “Tools” option in the main interface, select the “System Settings” menu (Figure 1), after entering the “System Settings” menu, click the “Startup Settings” option,
and select the “Communication Module” tab (Figure 2 ), after completing the above settings, return to the main interface to save the settings (Figure 3). Finally, select the function
menu to perform system restart settings, and wait for the system to complete the restart before proceeding to the next step.

After the system restarts, click the “System Settings” menu again and select the “Ethernet (No Protocol (UDP))” option (Figure 4). In this option, there will be parameter settings
such as IP address and port. What needs to be noted here are the two IP address parameters. The parameters in “Address Setting 2” need to be filled in. The information that needs
to be filled in includes the IP address of the vision controller, subnet mask, default gateway and DNS server.
In the port number setting of “Input/Output Settings” at the bottom of the menu, set the port number for data input with the sensor controller. Note that the port number should
be the same as the host side, and finally complete the settings and corresponding data saving work.

2ABB industrial robot communication settings

First, configure the WAN port IP address for the ABB industrial robot. Select the control panel in the teach pendant, then select configuration, then select communication in
the theme, click IPSetting, set the IP information and click “Change” to save the IP information.

Next, use the SocketCreate robot command to create a new socket using the streaming protocol TCP/IP and assign it to the corresponding variable (Figure 5). Then
use the SocketConnect command to connect the socket to the remote computer. After the communication connection is completed, it is necessary to send and receive
information from the visual system. To send information, use the SocketSend instruction to send data instructions to the remote computer. After the vision system collects
information and makes judgments, the industrial robot system will receive data from the remote computer. The data reception is completed using the
SocketReceive instruction. This instruction stores the data in the corresponding string variable while receiving the data. Useful information needs to be extracted from the
received data information, which requires StrPart to find the specified character position instruction, extract the data at the specified position from the string, and assign the
result to a new string variable. Finally, when the socket connection is not in use, use SocketCloSe to close it.

PHOENIX IB ST ZF 24 AI 4/SF-2750620 CONTACT I/O module
PHOENIX IB ST 24 AI 4SF-2754309 I/O module
INDRAMAT MAC112C-0-ED-2-C/130-B-0 servomotor
INDRAMAT MAC112D-0-ED-2-C/180-A-0/S011 motor
INDRAMAT MAC112C-0-HD-4-C/180-A-0/WI516LV/SO11 motor
INDRAMAT KDS1.3-200-300-W1 Ac servo driver
INDRAMAT KDS1.3-150-300-W1 Ac servo driver
KDV2.2-100-200/300-220 INDRAMAT Ac servo power supply
280D-F12Z-10B-CR A-B ArmorStart Starter
FBM218 FOXBORO Communication module
SM50/100-T BOSCH Processor module
SIEMENS 6ES7952-1AK00-0AA0 Memory card
PHOENIX 2961192 relay
MTL MTL5541 Safety grid
TRICONEX 1600071-001 Network communication card
POWERBOX PU200-31C DO module
A06B-6077-H106 FANUC Control system power supply
GE VME-1064 Digital output module
FAUNC A06B-0590-B004#7008 servomotor
MOTOROLA MVME705B Analog output module
Triconex SIS AI6700 Distributed I/O module
Triconex PM6301A Logic control module
Triconex SIS MP6004 Digital output module
TRICONEX DO6603 Controller module
TRICONEX ICM6211 System module
TRICONEX DI6503 Safety system card
YOKOGAWA DR1030B60 Servo controller
YOKOGAWA SR1030B62 Servo actuator
DAIICHI-DENTSU SAN4-40M driver
SIEMENS 6ES7416-3ES06-0AB0 Servo module
ABB 3HAC17484-8/08 Rotating ac motor
CICP1800RB CONTINENTAL Expansion board DI/DO
086345-504 ABB Optical fiber interface board
086329-003 ABB I/O board
GE 84-W8559F01B CPU module
RELIANCE ELECTRIC WR-D4005 Switch quantity input card
RELIANCE MD-D4002B Control processor
RELIANCE ELECTRIC 0-60031-5 Network communication module
RELIANCE 0-60029-1 I/O expansion interface board
RELIANCE 0-60028-2 Controls the I/O module
269PLUS-D/O-261-100P-120 GE Excitation control panel
SR750-P5-G1-S1-HI-A20-R GE Motor protection device
VEG20400 SCHENCK DCS card
VT-VPCD-1-15/V0/1-P-1 Rexroth Driver module
PR6423/00R-010+CON031 epro Axial vibration sensor
PR6423/008-110+CON041 EPRO Eddy current sensor
R88D-KN15F-ECT Omron controller
G2E140-51-09Р-180/225 ABB Centrifugal fan
RELIANCE 0-57170 Digital signal output module