FC-SDIL-1608 Single channel control card Honeywell

Product parameters

Model: FC-SDIL-1608

Brand: Honeywell

Size: 10cm x 10cm x 30cm

Weight: 1.2KG

Color: White Black

Working voltage: 5V

Working temperature: -10 ℃ to 50 ℃

Communication interface: RS232, RS485, CAN

Product specifications

Support for MODBUS protocol

Support hardware flow control

Using high-speed CMOS devices

Support for data caching

application area

FC-SDIL-1608 is mainly used in the field of industrial automation, such as DCS PLCs, industrial controllers, robots, etc.

FC-SDIL-1608 is mainly used in steel manufacturing, thermal power generation, hydroelectric power generation, glass manufacturing, paper mills, cement factories, petrochemicals

Chemical fiber, pharmaceutical manufacturing, rubber, plastics, ferrous metal food, machine tools, specialized equipment, transportation vehicles, mechanical equipment

Electronic communication equipment, instruments and beverages, tobacco processing, clothing, textiles, leather, wood processing, furniture, printing, etc

Model: FC-SDIL-1608 Brand: ABB Archive Function: Communication Function Product Certification: Qualified

Working voltage: 24V Internal variable: No pattern Type: Vector diagram Applicable range: Industrial type

Number of screens: 4 Imported or not: Yes Customized for processing: No

Alarm function: Product name: Module Input voltage: 24V Rated current: 5A

Special service: including postage. Remarks: one-year warranty. Operation method: remote control

Applicable motor: servo motor system memory: 8MB Display color: 99.9 color gamut

Power voltage: 220V Input method: Current Input Material code: 65218

Communication interface: HDMI interface Working temperature: 60 Material number 26854 Other functions Analog communication

Output frequency: 50HZ Rated voltage: 24V Alarm type: Light alarm

Disconnect capacity: 0.01 Vector graph support: Minimum number of packages supported: 1

Display type: IPS USB interface quantity: 2 interfaces Memory card slot: 2

Panel protection level: 3 Memory expansion capacity: 128MB User script support: supported

Speed response frequency: 1MS Working environment temperature: -40 to 100 Insulation withstand voltage test: Passed

Third party communication products: ABB controllers available for sale in: nationwide

Product Instructions

Please install FC-SDIL-1608 correctly on the device and connect the communication interface cable properly.

Please refer to the user manual for operating FC-SDIL-1608 to ensure proper use.

Product Introduction

FC-SDIL-1608 is a high-performance industrial automation communication module that uses high-speed CMOS devices, supports MODBUS protocol, and supports
hardware flow control. It is an ideal choice in the field of industrial automation.

Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technology
introduction

In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the
industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot”s front-end tools. This article
mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology.
DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with
Siemens PLC based on the DeviceNet network.

1Configure DSQC652

There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to
them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which
mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16
digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board,
enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2.
ABB standard I/0 board is hung on the DeviceNet
network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module.
The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down
menu to select the “Use value from template” row, select
“DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.
Figure 1 Configuring DSQC652

2Configure signals and parameters

After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with
the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the
signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting
input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters.
After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time
is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are
completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.
Figure 2 Configure DSQC652 parameters
Figure 3 Signal parameter settings

During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be
established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number
of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.

The entire robot teaching pendant setting process is shown in Figure 4.

5X00499G01   Westinghouse  INPUT CONTACT MODULE
5X00357G03    Westinghouse   I/O Interface Controller
5X00301G01 Westinghouse analog input module
5X00300G02  Westinghouse   DCS Control Module
5X00241G02  Westinghouse  Processor Module
5X00241G01  Westinghouse   Processor Module
5X00226G04  Westinghouse  I/O Interface Module
5X00226G03    Westinghouse   I/O Interface Controller
5X00226G02 Westinghouse analog input module
5X00226G01  Westinghouse  ANALOG INPUT EMOD ASSEMBLY – HART
5X00225G01  Westinghouse  Controller Base Assembly
5X00167G01    Westinghouse  Analog Output Module
5X00109G01 Westinghouse HART Analog Input Module
5X00106G01  Westinghouse  ANALOG INPUT EMOD ASSEMBLY – HART
5X00070G01  Westinghouse  Analog Input Hi Speed Module
5X00070G03    Westinghouse  Personalization Module
5X00058G01 Westinghouse HART Analog Input Module
1C31233G01  Westinghouse  Control Module
DFP100 DFP14C1N000GB  GE  Digital feeder protection relay
IC693PWR322  GE  Standard Power Supply module
1C31227G02  Westinghouse  Digital Input
1C31201G01   Westinghouse  Personalization Module
1C31197G05 Westinghouse Analog Input Module
1C31194G03  Westinghouse  Control Module
1C31194G01  Westinghouse  Digital Input
1C31192G01   Westinghouse  Digital Input
1C31189G01  Westinghouse  Speed Detector Interface
1C31179G01  Westinghouse  Digital Input
IC800SSI228RD2-CE  GE  Servo control module
P-OPEN-P4-150PAC-OP150P4  Neri  Electrical Interface Solenoid Valve
1C31150G01  Westinghouse  Digital Input
1C31147G01  Westinghouse  Digital Input
1C31129G03  Westinghouse  Analog quantity input
1C31107G01  Westinghouse  Digital Input
TU830V1 3BSE013234R1  ABB  Extended Module Termination Unit
IC695RMX128  GE  RX3i Redundant Memory Xchange Module
IC660ELB912 GE Genius Network Interface module
IC695CPU315  GE   CPU module for the RX3i PACSystem platforms
DM-20  RELIANCE   Servo Controller
1761-L32AWA   Allen-Bradley   MicroLogix Controller
SBI-PDP-32  GE  Profibus-DP
R-TPD3  GE  CIRCUIT BOARD
531X307LTBAHG1  GE  LAN Terminal Board 531X Series
531X303MCPBBG1 F31X303MCPA00200  GE  Supply Board
DS6800CCIE1F1D  GE   Control System
SK-G9-GDB1-D481  Allen-Bradley  PowerFlex 700 printed circuit board
SK-G9-GDB1-D292 Allen-Bradley Power Interface Board